FOG with DD-WRT firmware

From FOG Project
Jump to: navigation, search

If you would like to use a DD-WRT router for DHCP you will need to perform the following steps:

1. Log into your Router interface   
2. Go to the Services tab
3. Enable DNSMasq, and Local DNS
4. Under Additional DNSMasq Options add the following dhcp-boot=pxelinux.0,,X.X.X.X where X.X.X.X is the IP of your FOG server
5. Save/Apply settings

Dd-wrt dhcp configuration.png

If you would like to use a Tomato router for DHCP you will need to perform the following steps:

1. Log into your Router interface   
2. Select Advanced on the side bar.
3. select the DHCP/DNS sub menu.
4. in the "DNSMasq" "Custom Configuration" text-box, add the following dhcp-boot=pxelinux.0,,X.X.X.X where X.X.X.X is the IP of your FOG server
5. "Save" settings

Screenshot-1.png